KIA Niro: SRSCM (Supplemental Restraints System Control Module)
Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Restraint / SRSCM (Supplemental Restraints System Control Module)
- SRS Control Module (SRSCM) Repair procedures
- Front Impact Sensor (FIS) | Side Impact Sensor (SIS)
- Seat Belt Buckle Switch (BS)
READ NEXT:
SRS Control Module (SRSCM) Repair procedures
SRS Control Module (SRSCM) Description and operation
The primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to determine
between an event that warrants restraint system deployment and an event that
does not. The SRS
Front Impact Sensor (FIS) | Side Impact Sensor (SIS)
Front Impact Sensor (FIS) Description and operation
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The p
SEE MORE:
High Voltage Battery Module Balancing & Voltage Measurement
After removing the defective module from the HV battery pack make
carefully a visual check and then put back it into the
safety disposal box.
Warning
The cell quantity varies per module number. Check before
conducting procedure.
Dual Clutch Assembly
Components
Retaining ring
Spline hub
Snap ring
Dual clutch assembly
Dual Clutch Assembly Repair procedures
Removal
Remove the hybrid drive motor & dual clutch transmission assembly from
the vehicle.
(Refer to DCT Syst
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
