Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual

Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual

The Kia Niro First Generation (2017-2022) is using the electrical energy that is charged & stored inside the high voltage battery. This method prevents air pollution since fuel, like gasoline, is not required, negating the emission of exhaust gases. When decelerating or driving downhill, regenerative braking is utilized to charge the high voltage battery. This minimizes energy loss and increases the distance to empty. The vehicle is composed of a high voltage battery that drives the motor, air conditioner, and charges an auxiliary battery (12 V) that drives all other 12 V systems.

READ NEXT:

 General Information

 Safety Precaution

 Precautions to take before servicing high voltage system

Warning Hybrid vehicles have high voltage batteries. Incorrect handling of high voltage system or vehicle may lead to serious accident including electric shock and electric leakage. Warning Be sure to shut off the high voltage by removing th

SEE MORE:

 Crankcase Emission Control System

Schematic Diagram Repair procedures Inspection After disconnecting the vapor hose from the PCV valve, remove the PCV valve. Reconnect the PCV valve to the vapor hose. Run the engine at idle, then put a finger over the open end of the

 Hybrid Power Control Unit (HPCU) connector and high voltage cable

Hybrid Power Control Unit (HPCU) terminal And Input/Output signal HPCU Terminal Function Connector (C133-S) (94Pin) : HPCU signal input and control High Voltage Cable (C133-P) (2 Pin) : HPCU↔Power Relay Assembly

Categories