KIA Niro: Body Electrical System

READ NEXT:

 General Troubleshooting Information - Body Electrical System

 Before Troubleshooting

Check applicable fuses in the appropriate fuse/relay box. Check the battery for damage, state of charge, cleanliness and tight connections. (Refer to Engine Electrical System - "Battery") Warning Do not quick-charge a batte

 Handling Wires And Harnesses

Secure wires and wire harnesses to the frame with their respective wire ties at the designated locations. Remove clips carefully; don't damage their locks (A). Slip pliers (A) under the clip base and through the hole at an ang

SEE MORE:

 Replacing license plate lamp (Bulb type)

Operation Turn off vehicle and disconnect the negative terminal from the battery. Using a screwdriver, gently pry the lamp assembly. Remove the bulb by pulling it straight out. Install a new bulb in the socket. Install the lamp

 Quarter Fixed Glass

Quarter fixed glass Replacement Remove the rear pillar trim. (Refer to Interior Trim - "Rear Pillar Trim") Loosen the quarter fixed glass (A) mounting nuts. Tightening torque : 3.9 - 4.4 N*m (0.4 - 0.45 kgf*m, 2.9 - 3.

Categories