KIA Niro: General Troubleshooting Information - Body Electrical System
Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Body Electrical System / General Troubleshooting Information - Body Electrical System
READ NEXT:
Before Troubleshooting
Check applicable fuses in the appropriate fuse/relay box.
Check the battery for damage, state of charge, cleanliness and tight
connections.
(Refer to Engine Electrical System - "Battery")
Warning
Do not quick-charge a batte
Handling Wires And Harnesses
Secure wires and wire harnesses to the frame with their respective wire
ties at the designated
locations.
Remove clips carefully; don't damage their locks (A).
Slip pliers (A) under the clip base and through the hole at an ang
SEE MORE:
Safety Plug Description and operation
Description
Safety Plug is installed on the rear side of the high voltage battery and it
can mechanically shut the
high voltage circuit off when servicing the high voltage system. (i.e. High
Voltage Battery, Power
Relay Assembly, HPCU, BMS ECU
Room Lamp Repair procedures | Vanity Lamp Repair procedures
Removal
Warning
Put on gloves to prevent hand injuries.
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Disconnect the negative (-) battery terminal
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
