KIA Niro: Button Engine Start System

Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Body Electrical System / Button Engine Start System

Button Engine Start System / Description And Operation

Button Engine Start System / Components And Components Location Body control module (BCM) Smart key unit (SMK) Interior antenna 1 Interior antenna 2 FOB key Start Stop Button (SSB) Door handle & door antenna Bumper ant

Start/Stop Button | ESCL (Electronic Steering Column Lock)

Start/Stop Button Repair procedures Removal Disconnect the negative (-) battery terminal. Remove the crash pad garnish assembly (RH). (Refer to Body - "Crash Pad Garnish (RH)") Remove the start/stop button. (1) Push

SEE MORE:

Power Relay Assembly (PRA)

Description The Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor. It is located inside the battery pack assembly and controls the high voltage power c

Rear Cross Member Repair procedures

Removal Disconnect the battery negative cable. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N*m (11.0 - 13.0 kgf*m, 79.6 - 94.0 lb*ft) Warning Be careful not to damage the wheel nuts when removing the wheel and tire.