KIA Niro: Tailgate

READ NEXT:

 Tailgate Assembly

Tailgate / Repair Procedures Adjustment After loosening the tailgate hinge (A) mounting bolts, adjust the tailgate by moving it up and down, or right and left. Adjust the tailgate height by turning the tailgate overslam bumpers (B). Af

 Tailgate Trim | Tailgate Latch Assembly

Tailgate trim Replacement Warning Put on gloves to protect your hands. Warning Use a plastic panel removal tool to remove interior trim pieces without marring the surface. Be careful not to bend or scratch the trim and p

SEE MORE:

 Parking Distance Warning (PDW) Sensor

Connector and Terminal  function Circuit Diagram Removal PDW-F (Parking Distance Warning-Forward) Sensor Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") Disconnect the connector (A) from t

 Replacing the front wiper blade (Kia NIRO Hybrid)

Operation Turn off the vehicle. Move the wiper switch to the single wiping (MIST/1x) position. Hold the wiper switch for more than 2 seconds. Type A (if equipped) Raise the wiper arm. Lift the wiper blade clip up. Pull dow

Categories