KIA Niro: Body Side Molding
- Roof Rack Repair procedures
- Fender Garnish / Quarter Garnish Repair procedures, Front / Rear Wheel Guard Repair procedures
- Waist Line Molding Repair procedures
READ NEXT:
Roof Rack Repair procedures
Replacement
Warning
Put on gloves to protect your hands.
Warning
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
Be careful not to bend or scratch the trim and panels.
Remove the roof rac
Fender Garnish / Quarter Garnish Repair procedures, Front / Rear Wheel Guard Repair procedures
Fender Garnish Repair procedures
Replacement
Warning
Put on gloves to protect your hands.
Warning
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Be careful not to bend or scratch the tri
SEE MORE:
Replacing the front wiper
blade (Kia NIRO Hybrid)
Operation
Turn off the vehicle.
Move the wiper switch to the single
wiping (MIST/1x) position.
Hold the wiper switch for more than 2
seconds.
Type A (if equipped)
Raise the wiper arm.
Lift the wiper blade clip up. Pull
dow
Inverter kit / Body kit
Remove the battery (-) cable.
Disconnect the high voltage circuit. (Refer to Generals)
Use the recovery/reproduction/charging device to recover the coolant.
Warning
When removing the connector between the vehicle and the
compressor,
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
