KIA Niro: Safety Precaution
READ NEXT:
Precautions to take before servicing high voltage system
Warning
Hybrid vehicles have high voltage batteries. Incorrect handling of
high voltage system or vehicle may lead to serious
accident including electric shock and electric leakage.
Warning
Be sure to shut off the high voltage by removing th
Personal Protective Equipment Inspection
Check that the personal protective equipment is not damaged.
Check that the insulation gloves are not torn or damaged.
Wear the insulation glove after removing moisture.
Warning
Fold the insulation glove as above
Fold again 3~4 times
High Voltage Shut-off Procedures
Warning
Be sure to read and follow the "General Safety Information and
Caution" before doing any work related with the high voltage
system. Failure to follow the safety instructions may result in serious
electrical injuries.
Be sure to
SEE MORE:
Crankcase Emission Control System
Schematic Diagram
Repair procedures
Inspection
After disconnecting the vapor hose from the PCV valve, remove the PCV
valve.
Reconnect the PCV valve to the vapor hose.
Run the engine at idle, then put a finger over the open end of the
Safe Exit Warning malfunction and limitations
Safe Exit Warning malfunction
A: Check Blind-Spot Safety system
When Safe Exit Warning is not working
properly, the warning message will
appear on the cluster, and the master
warning light ( ) will appear on the
cluster.
Have Safe Exit
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
