KIA Niro: Parking Brake System
Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Brake System / Parking Brake System
READ NEXT:
Parking Brake Assembly Repair procedures
Parking Brake Assembly Components and components location
Parking brake pedal
Parking brake cable
Equalizer assembly
Parking Brake Assembly Repair procedures
Removal
Turn ignition switch OFF and disconnect the negative (-) battery
Parking Brake Cable Repair procedures
Removal
Turn ignition switch OFF and disconnect the negative (-) battery
terminal.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
Remove the knee air bag.
(Refer to Restraint - "Knee Airbag(KAB) Module&q
Electric parking brake / Description And Operation
Description
The EPB is an electronic parking brake.
The EPB is different from existing parking systems which operated with the brake
pedal or the lever
type. The EPB system sends the signal to the ECU when a driver operates the EPB
switch. T
SEE MORE:
Rear Stabilizer Bar Repair procedures
Removal
Disconnect the battery negative cable.
Remove the wheel and tire.
Tightening torque:
107.9 - 127.5 N*m (11.0 - 13.0 kgf*m, 79.6 - 94.0 lb*ft)
Warning
Be careful not to damage the wheel nuts when removing the wheel and
tire.
Replacing inner panel
fuse
Operation
Turn the vehicle and all other switches
off.
Open the fuse panel cover.
Pull the suspected fuse straight out.
Use the removal tool (1) provided in
the main fuse box in the engine compartment.
Check the remove
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
