KIA Niro: Crash Pad
- Cluster Fascia Panel | Center Fascia Panel
- Crash Pad Garmish
- Crash Pad Lower Panel | Glove Box Housing
- Steering Column Shroud Panel
- Crash Pad Side Cover
- Crash Pad Main Lower Panel
- Cowl Cross Bar Assembly
READ NEXT:
Cluster Fascia Panel | Center Fascia Panel
Cluster Fascia Panel Components and components location
Cluster fascia panel assembly
Cluster Fascia Panel Repair procedures
Replacement
Warning
Put on gloves to protect your hands.
Warning
Use a plastic panel removal tool to r
Crash Pad Garmish
Crash pad garmish (LH)
Crash pad garmish (RH)
Replacement
Crash pad garmish LH
Warning
Put on gloves to protect your hands.
Warning
When removing with a flat-tip screwdriver or remover, wrap
protective tape around the tools to
SEE MORE:
Heater Pipe | Active Air Flap (AAF) Repair procedure
Disconnect the battery negative terminal.
Loosen the drain plug, and drain the engine coolant. Remove the reservoir cap to help drain the coolant faster.
(Refer to Cooling System - "Coolant")
Remove
Quarter Fixed Glass
Quarter fixed glass
Replacement
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
Loosen the quarter fixed glass (A) mounting nuts.
Tightening torque :
3.9 - 4.4 N*m (0.4 - 0.45 kgf*m, 2.9 - 3.
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
