KIA Niro: Emergency Rescue Guide
Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Emergency Rescue Guide
- Emergency Rescue Guide - Introduction/ Identification
- Main Electronic Systems
- Emergency Procedures
- Roadside Assistance
READ NEXT:
Emergency Rescue Guide - Introduction/
Identification
Emergency Rescue Guide - Introduction
Document Purpose
The purpose of this document is to familiarize first responders and the
towing/roadside assistance industry with the proper
methods to handle the Niro PHEV in an emergency situation. This gu
High Voltage System
Vehicle components
12V auxiliary battery
The 12V auxiliary battery is located in the right side of the luggage room,
and powers all of the vehicle's standard electronics like
radio, air conditioner, etc. Also, it powers the HPCU (Hybrid
SEE MORE:
Cleaning
Make sure the ignition switch and all accessories are in the OFF
position.
Remove the battery from the vehicle.
(Refer to Charging System - "Battery")
Warning
Care should be taken in the event the battery case is cracked or
Hybrid Power Control Unit (HPCU) connector and high voltage cable
Hybrid Power Control Unit (HPCU) terminal And Input/Output signal
HPCU Terminal Function
Connector (C133-S) (94Pin) : HPCU signal input and control
High Voltage Cable (C133-P) (2 Pin) : HPCU↔Power Relay Assembly
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
