KIA Niro: Main Electronic Systems
Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Emergency Rescue Guide / Main Electronic Systems
READ NEXT:
High Voltage System
Vehicle components
12V auxiliary battery
The 12V auxiliary battery is located in the right side of the luggage room,
and powers all of the vehicle's standard electronics like
radio, air conditioner, etc. Also, it powers the HPCU (Hybrid
Airbag system (SRS: Supplemental Restraint System)
Airbag
Seven airbags are installed in the Niro, located in standard area of the
vehicle so that the first responder can find them
immediately. Before emergency procedure, make sure the vehicle ignition switch
is turned off, disconnect the negat
SEE MORE:
Hybrid Power Control Unit (HPCU) connector and high voltage cable
Hybrid Power Control Unit (HPCU) terminal And Input/Output signal
HPCU Terminal Function
Connector (C133-S) (94Pin) : HPCU signal input and control
High Voltage Cable (C133-P) (2 Pin) : HPCU↔Power Relay Assembly
Replacing main/multi fuses
Operation
Turn off the vehicle.
Remove the fuse panel cover by
pressing the tab and pulling the cover
up.
Disconnect the negative battery cable.
Remove the nuts shown in the picture
above.
Replace the fuse with a new one of
th
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
