KIA Niro: Engine Mechanical System / Repair Procedures

Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Engine Mechanical System / Engine Mechanical System / Repair Procedures

Compression Pressure Inspection

Warning If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. Warm up and stop the engine. Allow the engine to warm up to normal operating temperature. Remove the air cleaner. (R

Engine Mechanical System / Troubleshooting

Symptoms : Engine misfire with abnormal internal lower engine noises Suspected area â†’ Remedy Worn crankshaft bearings â†’ Replace the crankshaft and bearings as re

Cooling System

Components Reservoir tank Reservoir hose & pipe Radiator Radiator upper hose Radiator lower hose Radiator upper mounting bracket (RH) Radiator upper mounting bracket (LH) Radiator lower mounting insulator (RH) Radiator low

SEE MORE:

TPMS Receiver Repair procedures

Removal Disconnect the battery negative cable. Remove the glove box. (Refer to Body - "Glove Box Housing") Disconnect the blower motor connector (A). Disconnect the body control module (BCM) connector (A). Loos

Service Point Target Auto Calibration (SPTAC) Procedure

Install the SST (09964-C1200) on the roof center above the vehicle's front windshield. Have the laser illuminate starting from the roof center and to passing through the emblem center. Warning The level laser must be se