KIA Niro: High Voltage Battery System
Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Service Highlight / High Voltage Battery System
- High Voltage Battery System / Components And Components Location / Repair Procedures
- Sub Battery Pack Assembly
- Battery Pack Assembly Repair procedures
- Battery Pack Assembly Troubleshooting Chart
READ NEXT:
High Voltage Battery System / Components And Components Location / Repair Procedures
Description
The High Voltage Battery System provides the hybrid drive motor, HSG, and electric A/C compressor
with electric energy and also reserves the electric energy generated during regeneration braking.It
consists of the battery pack assemb
Sub Battery Pack Assembly
Warning
Be sure to read and follow the "General Safety Information and
Caution" before doing any work related with the high
voltage system. Failure to follow the safety instructions may result in
serious electrical injuries.
Be sure to
SEE MORE:
Electric parking brake control
Electric parking brake control module
EPB switch
EPB actuator
Removal and Installation
EPB Actuator
Turn ignition switch off and disconnect the battery (-) cable from the
battery.
Remove the rear caliper.
(Refer to Brake Sys
On vehicle inspection/ Component Inspection
On vehicle inspection
Accelerate the engine to about 3,000 rpm 3 times or more.
Remove the spark plug.
Check the spark plug visually.
If the electrode is dry, the spark plug is normal.
If the electrode is wet, check the damage and elect
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
