KIA Niro: Rear Seat
- Rear Seat Assembly | Rear Seat Back Cover
- Rear Seat Cushion Cover | Rear Back Armrest
- Rear Center Seat Belt Retractor
READ NEXT:
Rear Seat Assembly | Rear Seat Back Cover
Rear seat back assembly
Rear seat cushion covering
Rear seat cushion pad
Rear seat cushion heater
Rear seat armrest
Rear seat back covering
Rear seat back pad
Rear seat back frame
Rear seat headrest guide
Rear Seat Cushion Cover | Rear Back Armrest
Rear seat cushion cover
Replacement
Remove the seat assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
Remove the rear seat cushion cover (A) after removing the hog-ring clips on the rear of seat cushi
SEE MORE:
Rear Stabilizer Bar Repair procedures
Removal
Disconnect the battery negative cable.
Remove the wheel and tire.
Tightening torque:
107.9 - 127.5 N*m (11.0 - 13.0 kgf*m, 79.6 - 94.0 lb*ft)
Warning
Be careful not to damage the wheel nuts when removing the wheel and
tire.
Hybrid Motor Cooling System
Description
The Hybrid Power Control Unit (HPCU) uses various semiconductors that are
supplied with high voltage, hence generating
more heat than engine combustion devices. Overheating can decrease the
efficiency of control devices, restrict pr
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us