KIA Niro: High Voltage Battery Cooling System

Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Hybrid Control System / High Voltage Battery Cooling System

Cooling Fan Description and operation | Cooling Fan Repair procedures

Component Location Cooling Fan #1 Cooling Fan #2 Main High Voltage Battery Cooling Duct (Inlet) Main High Voltage Battery Cooling Duct (Outlet) Sub High Voltage Battery Cooling Duct (Inlet) Sub High Voltage Battery

Rear / Front Inlet Cooling Duct

Removal Warning Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical inj

SEE MORE:

Pre-Charge Relay

Specification Description The Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor. It is located inside the battery pack assembly and controls the h

Battery Terminal

Move back and forth to check that the battery terminals (A) are loose or corroded.If the terminals are corroded, clean them. If battery positive connection is loose, disconnect ground(GND) cable first before attempting to remove