KIA Niro: High Voltage Battery System
Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual / Hybrid Control System / High Voltage Battery System
- High Voltage Battery System / Components And Components Location
- High Voltage Battery System / Repair Procedures
- Sub Battery Pack Assembly
- Battery Pack Assembly Repair procedures
READ NEXT:
High Voltage Battery System / Components And Components Location
Description
The High Voltage Battery System provides the hybrid drive motor, HSG, and
electric A/C compressor
with electric energy and also reserves the electric energy generated during
regeneration braking.It
consists of the battery pack asse
High Voltage Battery System / Repair Procedures
Removal
Warning
Be sure to read and follow the "General Safety Information and
Caution" before doing any work related with the high
voltage system. Failure to follow the safety instructions may result in
serious electrical inju
Sub Battery Pack Assembly
Warning
Be sure to read and follow the "General Safety Information and
Caution" before doing any work related with the high
voltage system. Failure to follow the safety instructions may result in
serious electrical injuries.
Be sure to
SEE MORE:
Fuel Pump Repair procedures
Fuel sender
Turn the ignition switch OFF, and then remove battery (-) terminal.
Remove the fuel pump assembly.
Using an ohmmeter, measure the resistance between terminals 1 and 6 of
sender connector (A) at
each float level.
Heater Unit Repair procedures
Replacement
Warning
When prying with a flat-tip screwdriver or a prying trim tool, wrap
a protective tape around the related parts and the tool to
prevent damage.
Disconnect the negative (-) battery terminal.
Recover the refrigerant with a
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
