KIA Niro: Theft-alarm system
READ NEXT:
Armed stage
The system provides an
audible alarm and the hazard
warning lights blink if
triggered. The system is
operated in 3 stages.
Armed stage
Operation
Lock the doors by pressing the lock
button on the key or door handle.
The hazard warning li
Disarmed stage
Operation
The hazard warning lights will blink
twice after the doors are unlocked.
After pressing the door unlock button,
if any door (or tailgate) is not opened
within 30 seconds, the system will be
rearmed.
Operating condition(s)
Immobilizer system
The immobilizer system reduces the risk
of unauthorized vehicle use.
It is comprised of a small transponder in
the ignition switch and electronic
devices inside the vehicle. It checks and
determines and verifies if the ignition
key is valid o
SEE MORE:
Resolver Sensor Repair procedures | Motor Temperature Sensor Repair procedures
Inspection
Hybrid Drive Motor
Inspect the resolver sensor resistance.
If the resolver sensor needs to be replaced, replace the hybrid drive motor assembly.
(Refer to Hybrid Motor Assembly - "Hybrid Drive M
Crankshaft
Check the crankshaft bearing oil clearance.
(1) To check main bearing-to-journal oil clearance, remove the lower
crankcase and lower bearings.
(2) Clean each main journal and bearing with a clean shop towel.
(3) Place one strip of plastigag
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
