KIA Niro: Armed stage

The system provides an audible alarm and the hazard warning lights blink if triggered. The system is operated in 3 stages.

Armed stage

Operation

  1. Lock the doors by pressing the lock button on the key or door handle.
  2. The hazard warning lights will blink once to indicate that the system is armed.
  3. The chime will sound for approximately 3 seconds if any doors remain open.

Operating condition(s)

  • 30 seconds after all doors are closed and locked.
  • Mechanical key is removed from the ignition switch.
  • ENGINE START/STOP button is in the OFF position.

Theft-alarm stage

Operation

  1. The horn will sound.
  2. The hazard warning lights will blink continuously for approximately 30 seconds.
  3. Unlock the doors with the key to turn off the system.

    READ NEXT:

     Disarmed stage

    Operation The hazard warning lights will blink twice after the doors are unlocked. After pressing the door unlock button, if any door (or tailgate) is not opened within 30 seconds, the system will be rearmed. Operating condition(s)

     Immobilizer system

    The immobilizer system reduces the risk of unauthorized vehicle use. It is comprised of a small transponder in the ignition switch and electronic devices inside the vehicle. It checks and determines and verifies if the ignition key is valid o

     Door locks

    SEE MORE:

     Connector Inspection Procedure

    Handling of Connector   Never pull on the wiring harness when disconnecting connectors. When removing the connector with a latch, press or pull locking lever. Listen for a click when locking connectors. This

     Crankcase Emission Control System

    Schematic Diagram Repair procedures Inspection After disconnecting the vapor hose from the PCV valve, remove the PCV valve. Reconnect the PCV valve to the vapor hose. Run the engine at idle, then put a finger over the open end of the

    Categories