KIA Niro: Charging and climate

Charging and climate

A: Electric Vehicle

  1. Scheduled charging and target temperature

Select EV ? Scheduled charging and target temperature on the screen.

NOTICE

Vehicle must be connected with the charging connector at the time prescheduled time for the scheduled charging.

Charging and climate

A: Scheduled charging and target temperature

  1. Scheduled charging
  2. Target temperature

You can set the date and time of when to charge the battery and the climate control temperature. Also, you may select the time to start charging using the Off-peak time settings.

Off-peak time settings

Off-peak time settings

A: Off-peak Hours Settings

  1. Start Time
  2. End Time
  3. Charging options

 

  1. If selected, starts charging only on the designated off-peak time. If deselected, starts charging only on the scheduled time.
  2. Set the most inexpensive time to complete charging.
  • Off-peak tariffs prioritised: If selected, starts charging at offpeak time (may keep on charging pass off-peak time to charge 100%).
  • Off-peak tariffs only: If selected, charges only within off-peak time (may not charge 100%).

Target temperature Settings

Target temperature Settings

A: Target temperature Settings

  1. Target temperature

If the target temperature (1) is set with the cable connected, the cabin temperature will be adjusted to the target temperature at departure time. In cold weather, pre-scheduled heating helps enhance electric vehicle performance by heating the vehicle in advance.

NOTICE

The infotainment system may change after software updates. For more information, refer to the manual provided in the infotainment system and the quick reference guide.

    READ NEXT:

     Vehicle to load (V2L)

    V2L is the system that provides AC power using the high voltage battery for driving to operate several electronical products. A: Electric Vehicle EV Charge Transfer Select EV ? EV Charge Transfer on the screen. You can set the batt

     How to connect

    Outdoor (if equipped) Open the cover of the V2L connector.  Close the cover after connecting home appliances and electronic products to the power outlet.  Connect the V2L connector to the charging hole on the vehicle. Pr

     LCD display messages

    V2L finished. Defined charge level reached A: V2L finished. Defined charge level reached When the high voltage battery level reaches the discharging limit set level, the V2L will stop and the warning will be displayed. If you want to use th

    SEE MORE:

     Lighting System

    Lighting System / Components And Components Location Specifications Lighting System / Components And Components Location Headlamp (Low/High BI-Function) Turn signal lamp Sub low beam Daytime running light, Position lamp Fog

     Inhibitor Switch Repair procedures

    Inspection Warning Inspect the following items by referring to inspection flow chart. (Refer to Inhibitor Switch - "Troubleshooting") Check the diagnostic trouble codes (DTC) using KDS. Inspect if "N" range setting matc

    Categories