KIA Niro: Rear Cross-Traffic Collision-Avoidance Assist malfunction
A: Check blind-spot safety systems
When Rear Cross-Traffic Collision-
Avoidance Assist is not working properly,
the warning message will appear on
the cluster for several seconds, and the
master (
) warning light will
appear on
the cluster. If this occurs, have the function
be inspected by a professional
workshop. Kia recommends visiting an
authorized Kia dealer/service partner.
A: Check outside mirror warning icon
When the outside rearview mirror warning
light is not working properly, the
warning message will appear on the
cluster for several seconds, and the
master ( 
) warning light will
appear on
the cluster. If this occurs, have the function
be inspected by a professional
workshop. Kia recommends visiting an
authorized Kia dealer/service partner.
WARNING
- Even though the warning message does not appear on the cluster, Rear Cross-Traffic Collision-Avoidance Assist may not operate properly.
- Rear Cross-Traffic Collision-Avoidance Assist may not operate properly in an area (for example, open terrain), where any substance are not detected after turning ON the vehicle.
CAUTION
Turn off Rear Cross-Traffic Collision- Avoidance Assist to install or remove a trailer, carrier, or another attachment.
Turn on Rear Cross-Traffic Collision- Avoidance Assist when finished.
READ NEXT:
Limitations of Rear Cross-Traffic
Collision-Avoidance Assist
Rear Cross-Traffic Collision-Avoidance
Assist may not operate properly, or it
may operate unexpectedly under the
following circumstances:
Departing from where trees or grass
are overgrown
Departing from where roads are wet
Speed of the a
Reverse Parking Distance Warning settings
Reverse Parking Distance
Warning (PDW) (if equipped)
Reverse Parking Distance Warning will
help warn the driver if a person, an animal
or an object is detected within a certain
distance when the vehicle is moving
in reverse.
Detecting sensor
SEE MORE:
Pre-Charge Relay
Specification
Description
The Power Relay Assembly (PRA) consists of the positive and negative main
relays, pre-charge relay, pre-charge resistor and
battery current sensor. It is located inside the battery pack assembly and
controls the h
Air Bleeding Tool Removal Procedure
Close the air shut-off valve (A) first, after disconnecting the air hose
(B), bleed air in the reservoir tank by opening the air shut-off valve
(A) slowly.
Warning
To prevent backflow of brake fluid, be sure to open the air shut-off
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
