KIA Niro: Regenerative braking system (Kia Niro EV)
KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Driving your vehicle / Regenerative braking system (Kia Niro EV)
READ NEXT:
Adjusting regenerative braking with paddle shifter
The regenerative braking system allows
you to charge the battery when you use
the brakes to stop the vehicle.
Adjusting regenerative braking with paddle
shifter
Operation
Pull the left side ( ) of
the paddle
shifter to increase
One pedal driving
The driver can stop the vehicle by pulling
and holding the left side paddle
shifter.
Operation
Pull and hold the left side (
) of the
paddle shifter while coasting.
When the vehicle speed is above 3
km/h (1 mph), regenerative braking
SEE MORE:
Hybrid Control System - Service Data
Hybrid Power Control Unit (HPCU)
Brake Switch
Type : ON/OFF Switch
DC Fuse
High Voltage Battery System
Battery Pack Assembly
General Specification
Warning
Main high voltage battery pack assembly (180V) + Sub high voltag
Quarter Fixed Glass
Quarter fixed glass
Replacement
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
Loosen the quarter fixed glass (A) mounting nuts.
Tightening torque :
3.9 - 4.4 N*m (0.4 - 0.45 kgf*m, 2.9 - 3.
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
