KIA Niro: Smart regeneration system

KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Driving your vehicle / Smart regeneration system

Setting smart regeneration system (Kia Niro EV)

Smart regeneration system The Smart Regeneration System controls the regenerative braking automatically according to the road gradient and driving condition of the vehicle in front. The system minimizes the unnecessary operation of the brake

Smart regeneration system (Kia NIRO Hybrid)

The Smart Regeneration System controls the regenerative braking automatically according to the road gradient and driving condition of the vehicle in front. The system minimizes the unnecessary operation of the brake and acceleration pedal, im

Resuming smart regeneration system

To re-activate the Smart Regeneration System while driving, with the vehicle on, touch Settings → Vehicle → Eco Vehicle → Smart Recuperation on the infotainment system or pull and hold the right side paddle shifter for over 1 second. T

SEE MORE:

Water Temperature Control Assembly

Removal and Installation Water Temperature Control Assembly Disconnect the battery negative terminal. Loosen the drain plug, and drain the engine coolant. Remove the reservoir cap to help drain the coolant faster. (Refer to Cool

Charging door (Kia Niro EV)

Opening the charging door Operation Press the right center edge of the charging door. The charging door is not open when the vehicle is locked. Closing the charging door Operation Close the charging door by pressing rear