KIA Niro: User settings mode
In this mode, you can change the settings of the instrument cluster, doors, lights, etc.
* The information provided may differ depending on which functions are applicable to your vehicle.
- Driver Assistance (if equipped)
- Head-Up Display (if equipped)
- Cluster (if equipped)
- Lights (if equipped)
- Door (if equipped)
INFORMATION
Automatically Lock
- Enable On Shift: All doors will be
automatically unlocked when the
vehicle is shifted to P (Park) to R
(Reverse), N (Neutral), or D (Drive).
(With the Engine ON, it is activated.)
- Enable On Speed: All doors will be automatically locked when the vehicle speed is over 15 km/h (9 mph).
Automatically Unlock
- On Shift to P: All doors will be
automatically unlocked if the gear
is shifted to the P (Park) position.
(With the Engine ON, it is activated.)
- Vehicle Off/On key out (if equipped): All doors will be automatically unlocked when the ignition key is removed from the ignition switch or the ENGINE START/STOP button is set to the OFF position.
- Convenience (if equipped)
- Units
- Language
- Reset
READ NEXT:
LCD display messages (Kia Niro EV)
* For EV warning messages, refer to "LCD display messages"
LCD displays / Displayed contents
Door, hood, tailgate, sunroof
open
Low tire pressure warning display
A: Low tyre pressure
A: Lights
1:
2:
3: AUTO
4: OFF (O)
LCD display messages (Kia NIRO Hybrid)
For Plug-in hybrid vehicle (Kia NIRO Hybrid)
LCD displays/ Displayed contents
Door, hood, tailgate, sunroof
open
Low tire pressure warning
display
A: Low tire pressure
A: Lights
1:
2:
3: AUTO
4: OFF (O)
A
Warning and indicator lights (Kia Niro EV)
Once you set the vehicle to the ON position, the symbols shown below will
light up. If these symbols remain on or malfunction, we
recommend having the vehicle inspected by an authorized Kia dealer/service
partner.
The information provided may
SEE MORE:
Power Cable (HPCU-HSG, Electric /C Compressor). Main High Voltage Battery System, Sub High Voltage Battery System
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Shut off the high voltage.
(Refer to "High voltage Shut-off Procedures")
Disconnect the motor power cable connector (A) and HSG p
Fastening and releasing the seat
belt
3-point system with emergency locking retractor
Operation
To fasten the seat belt, insert the
metal tab into the buckle (2).
To release the seat belt, press the
release button (1) in the locking
buckle.
INFORMATION
There will be
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us