KIA Niro: Changing a tire equipped with Tire Pressure Monitoring System (TPMS) (Kia Niro EV)

Contact a professional workshop or seek other qualified assistance. Kia recommends to call an authorized Kia dealer/ service partner.

INFORMATION

You may not be able to identify a low tire by simply looking at it. Always use a good quality tire pressure gauge to measure the tire's inflation pressure. Note that a tire that is hot (from being driven) will have a higher pressure measurement than a tire that is cold (from sitting stationary for at least 3 hours and driven less than 1 mile (1.6 km) during that 3 hour period).

Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure.

A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period.

WARNING

  • The TPMS cannot alert you to severe and sudden tire damage caused by external factors such as nails or road debris.
  • If you feel any vehicle instability, immediately take your foot off the accelerator, apply the brakes gradu ally and with light force, and slowly move to a safe position off the road.
  • Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may interfere with the system's ability to warn the driver of low tire pressure conditions and/or TPMS malfunctions.

    Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may void the warranty for that portion of the vehicle.

WARNING

For Europe

  • Do not modify the vehicle, it may interfere with the TPMS function.
  • The wheels on the market do not have a TPMS sensor. For your safety, use parts for replacement from a professional workshop. Kia recommends visiting an authorized Kia dealer/service partner.
  • If you use the wheels on the market, use a TPMS sensor approved by an authorized Kia dealer.

    If your vehicle is not equipped with a TPMS sensor or TPMS does not work properly, you may fail the periodic vehicle inspection conducted in your country.

  • All vehicles sold in the EUROPE market during below period must be equipped with TPMS.
  • New model vehicle: Nov. 1, 2012 ~
  • Current model vehicle: Nov. 1, 2014~ (Based on vehicle registrations)

CAUTION

We recommend that you use the sealant approved by Kia if your vehicle is equipped with a Tire Pressure Monitoring System. The liquid sealant can damage the tire pressure sensors.

    READ NEXT:

     If you have a flat tire (with spare tire) - Kia NIRO Hybrid only

     Removing and storing the spare tire

    Jack and tools Jack handle Jack Wheel lug nut wrench Removing and storing the spare tire Operation Remove the luggage board cover (1). Turn the tire hold-down wing bolt counterclockwise. Store the tire in the

     Changing tires

    Operation Stop the vehicle to a safe leveled place away from traffic. Turn the hazard warning flasher on. Set the parking brake. Change the gear to P and turn the vehicle off. Remove the jack, wheel lug nut wrench and the sp

    SEE MORE:

     Jump-starting (Kia NIRO Hybrid)

    Condition(s) When the vehicle will not start due to low battery power, you may need to jump start the vehicle. Operation Turn off all unnecessary electrical loads. Make sure the booster battery is 12- volt and that its negati

     Power Relay Assembly (PRA)

    Description The Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor. It is located inside the battery pack assembly and controls the high voltage power c

    Categories