KIA Niro: Intelligent Speed Limit Assist (ISLA)

Intelligent Speed Limit Assist uses information from the detected road sign and navigation system to inform the driver of the speed limit and additional information of the current road. Also, Intelligent Speed Limit Assist helps the driver to maintain within the speed limit of the road.

CAUTION

  • Intelligent Speed Limit Assist may not operate properly if the function is used in other countries.
  • If a navigation is applied to your vehicle, the navigation needs to be regularly updated for Intelligent Speed Limit Assist to operate properly.

Detecting sensor

Front view camera
Front view camera

Refer to the picture above for the detailed location of the detecting sensor.

CAUTION

For more details on the precautions of the front view camera, refer to "Forward Collision-Avoidance Assist (FCA) (Front Camera Only) (if equipped)"

READ NEXT:

 Intelligent Speed Limit Assist settings

Speed limit A: Driver Assistance Speed Limit Speed Limit Assist Speed Limit Warning Off With the vehicle on, touch Settings ? Driver Assistance ? Speed Limit on the instrument cluster or Settings ? Vehicle ? Driver Assistance

 Intelligent Speed Limit Assist operation

Warning and control Intelligent Speed Limit Assist is warned and controlled by the following level. Displaying speed limit Warning overspeed Changing set speed NOTICE Intelligent Speed Limit Assist warning and control are described bas

 Intelligent Speed Limit Assist malfunction and limitations

Intelligent Speed Limit Assist malfunction A: Check Speed Limit system When Intelligent Speed Limit Assist is not working properly, the warning message will appear on the cluster for several seconds, and the master ( ) warning light will ap

SEE MORE:

 Speaker Repair procedures

Troubleshooting of the speakers Warning When handling the speakers : Do not cause shock to the speakers by dropping or throwing them. Be careful not to drop water and oil on the speakers. Use caution to handle the speaker because diaphra

 TPMS Receiver Repair procedures

Removal Disconnect the battery negative cable. Remove the glove box. (Refer to Body - "Glove Box Housing") Disconnect the blower motor connector (A). Disconnect the body control module (BCM) connector (A). Loos