KIA Niro: Lighting
- Battery saver function
- Lighting controls (Kia NIRO Hybrid)
- Lighting controls (Kia Niro EV)
- Operating the fog lights (if equipped)
- High Beam Assist (HBA)
- High Beam Assist Malfunction and limitations
READ NEXT:
Battery saver function
Battery saver function(Kia Niro EV)
Operation
The position lamp will turn off automatically.
Operating condition(s)
The vehicle is off and the driver's door
is opened.
INFORMATION
However, the position lamps stay ON
even wh
Lighting controls (Kia NIRO Hybrid)
Operating lights
Type A
Type B
Type C
Operation
/
Tailamps and headlamps will turn
ON or OFF automatically depending
on the amount of light outside
the vehicle.
Position & Taillamp ( )
Low beam
Lighting controls (Kia Niro EV)
Operating lights
Type A
Type B
Type C
Operation
OFF (O)
AUTO
The headlamps and tailamps will
turn ON or OFF automatically
depending on the external ambient
light level.
Position & Taillamp ( )
Low beam ( )
I
SEE MORE:
Ignition Switch
Ignition Switch / Repair Procedures
Inspection
Disconnect the key warning switch connector (A) and ignition switch
connector (B) from the steering column.
Check for continuity between the terminals.
If continuity is not specif
The Power Relay Assembly
Specification
Description
The Power Relay Assembly (PRA) consists of the positive and negative main
relays, pre-charge relay, pre-charge resistor and
battery current sensor. It is located inside the battery pack assembly and
controls the h
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
