KIA Niro: Replacing the front wiper blade (Kia NIRO Hybrid)

Replacing the front wiper blade (Kia NIRO Hybrid)

Operation

  1. Turn off the vehicle.
  2. Move the wiper switch to the single wiping (MIST/1x) position.
  3. Hold the wiper switch for more than 2 seconds.
  4. Type A (if equipped)
  • Raise the wiper arm.
  • Lift the wiper blade clip up. Pull down the blade assembly and remove it.

Replacing the front wiper blade (Kia NIRO Hybrid)

  • Install the new blade assembly.

Replacing the front wiper blade (Kia NIRO Hybrid)

  1. Type B (if equipped)
  • Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip.

Replacing the front wiper blade (Kia NIRO Hybrid)

  • Compress the clip and slide the blade assembly downward.

Replacing the front wiper blade (Kia NIRO Hybrid)

  • Lift it off the arm.
  • Install the blade assembly in the reverse order of removal.
  1. Install the new blade assembly.

Replacing the front wiper blade (Kia NIRO Hybrid)

  1. Return the wiper arm on the windshield.
  2. Turn the vehicle on and wiper arms will return to the normal operating position.

    READ NEXT:

     Replacing the front wiper blade (Kia Niro EV)

    Operation Turn off the vehicle. Move the wiper switch to the single wiping (MIST/1x) position within 20 seconds. Hold the wiper switch for more than 2 seconds. Raise the wiper arm. Lift the wiper blade clip up (1). Pull down t

     Replacing rear wiper blade  Kia Niro EV /  Hybrid

    Replacing rear wiper blade Operation Turn off the vehicle. Move the wiper switch to the single wiping (MIST/1x) position. Hold the wiper switch for more than 2 seconds. Raise the wiper arm and pull out the wiper blade assembly.

     Battery

    SEE MORE:

     Release Residual Pressure in Fuel Line | Fuel Tank Repair procedures

    Warning Whenever the high pressure fuel fuse, fuel pipe, delivery pipe, or injector is removed immediately after shutting off the engine, an injury may be caused by the release of highly pressurized fuel. Release the residual pressure in the

     Fuses

    Blade type Cartridge type Multi fuse BFT * Left: Normal, Right: Blown * The actual fuse/relay panel label may differ. Before replacing a blown fuse, disconnect the negative battery cable. If the electrical system does not work,

    Categories