KIA Niro: Wiper blade

KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Maintenance / Wiper blade

Replacing the front wiper blade (Kia NIRO Hybrid)

Operation Turn off the vehicle. Move the wiper switch to the single wiping (MIST/1x) position. Hold the wiper switch for more than 2 seconds. Type A (if equipped) Raise the wiper arm. Lift the wiper blade clip up. Pull dow

Replacing the front wiper blade (Kia Niro EV)

Operation Turn off the vehicle. Move the wiper switch to the single wiping (MIST/1x) position within 20 seconds. Hold the wiper switch for more than 2 seconds. Raise the wiper arm. Lift the wiper blade clip up (1). Pull down t

Replacing rear wiper blade Kia Niro EV / Hybrid

Replacing rear wiper blade Operation Turn off the vehicle. Move the wiper switch to the single wiping (MIST/1x) position. Hold the wiper switch for more than 2 seconds. Raise the wiper arm and pull out the wiper blade assembly.

SEE MORE:

Crankshaft Position Sensor (CKPS)

Specification Crankshaft Position Sensor (CKPS) Description and operation Description Crankshaft Position Sensor (CKPS) is one of the most important sensors of the engine control system that detects the crankshaft position. Lack of CKPS sig

Hybrid Power Control Unit (HPCU)/ Repair procedures

Removal Warning Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical inju