KIA Niro: Suitability of each seating position for belted & ISOFIX Child Restraint Systems according to UN regulations for Latin America (Information for use by vehicle users and CRS manufacturers)
- Yes: Suitable for fitment of the designated category of CRS
- No: Not suitable for fitment of the designated category of CRS
- "-": Not applicable
- The table is based on LHD vehicle. Except for the front passenger seat, the table is valid for RHD vehicle.
For RHD vehicle front passenger seat, please use information for the seating position number 3.
F: Forward facing
R: Rearward facing
* 1. To install Universal CRS, 1st row passenger seat should be adjusted appropriate position which do not interfere stable installation (adjust to possible height or upright position).
* 2. Never install CRS with a support leg on 2nd row center seating position.
* If the head restraints prevent proper installation of a CRS, the head restraints of the seating position shall be readjusted or entirely removed.
* Never place a rearward facing Child Restraint System on the front passenger seat, unless the air bag is deactivated.
Recommended CRS for Vehicle in Latin America according to UN regulations (Information for use by vehicle users and CRS manufacturers)
CRS Manufacturer information (for Latin America)
Suitability of each seating position for belted & ISOFIX Child Restraint Systems (CRS) according to UN regulations for Australia (Information for use by vehicle users and CRS manufacturers)
- Yes : Suitable for fitment of the designated category of CRS
- No : Not suitable for fitment of the designated category of CRS
- "-": Not applicable
- The table is based on LHD vehicle. Except for the front passenger seat, the table is valid for RHD vehicle.
For RHD vehicle front passenger seat, please use information for the seating position number 3.
F: Forward facing
R: Rearward facing
* 1. To install Universal CRS, 1st row passenger seat should be adjusted appropriate position which do not interfere stable installation (adjust to possible height or upright position)
* 2. Never install CRS with a support leg on 2nd row center seating position
* If the head restraints prevent proper installation of a CRS, the head restraints of the seating position shall be readjusted or entirely removed.
* Never place a rearward facing Child Restraint System on the front passenger seat, unless the air bag is deactivated.
READ NEXT:
Air bag - supplemental restraint system
Left-hand drive
Right-hand drive
* The actual features in your vehicle may not necessarily be available due to
the
selected options or regions.
Passenger's front air bag
Driver's front air bag
Side air bag*
Curtain air
Passenger's front air bag ON/OFF settings (Kia NIRO Hybrid)
You can deactivate the passenger's front
air bag from the User Settings Mode on
the LCD display if a child restraint is
installed on the front passenger's seat or
if the front passenger's seat is unoccupied
by a person. If your vehic
SRS components and functions
* The actual features in your vehicle may
not necessarily be available due to the
selected options or regions.
Driver's front air bag module
Passenger's front air bag module
Side air bag modules*
Curtain air bag modules*
Ret
SEE MORE:
Motor compartment fuse panel (Kia Niro EV)
Circuit (P/R Junction Block)
Fuse Name/ Symbol/ Fuse Rating/ Circuit Protected
MULTI
FUSE-1
LDC// 150A/ Fuse (IEM, EOP,
Inverter, Power Outlet)
MDPS1// 80A/
MDPS Unit
* MDPS is the same as EPS (Electric Power Steering)
Fuel Pump Repair procedures
Fuel sender
Turn the ignition switch OFF, and then remove battery (-) terminal.
Remove the fuel pump assembly.
Using an ohmmeter, measure the resistance between terminals 1 and 6 of
sender connector (A) at
each float level.
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
