KIA Niro: Brake system
- In the event of brake failure (Kia NIRO Hybrid)
- In the event of brake failure (Kia Niro EV)
- Parking brake
- Releasing EPB automatically (Kia NIRO Hybrid)
- Releasing EPB automatically (Kia Niro EV)
- AUTO HOLD
READ NEXT:
In the event of brake failure (Kia NIRO Hybrid)
Operation
Make an emergency stop with the
parking brake.
Operating condition(s)
The brake has failed
WARNING
Avoid applying the parking brake to stop
the vehicle while it is moving except in
an emergency situation. Applying the
pa
In the event of brake failure (Kia Niro EV)
Operation
Make an emergency stop with the
parking brake.
Operating condition(s)
The brake has failed
Power-assisted brakes
Operation
Apply greater force to the brake
pedal.
Operating condition(s)
The vehicle is stalled
Parking brake
Check if the brake warning light (
)
appears when the vehicle is in the
START or ON position. Be sure the parking
brake is fully released and the brake
warning light ( ) is off before
driving.
WARNING- (Kia Niro EV only)
To reduce the ris
SEE MORE:
Motor compartment fuse panel (Kia Niro EV)
Circuit (P/R Junction Block)
Fuse Name/ Symbol/ Fuse Rating/ Circuit Protected
MULTI
FUSE-1
LDC// 150A/ Fuse (IEM, EOP,
Inverter, Power Outlet)
MDPS1// 80A/
MDPS Unit
* MDPS is the same as EPS (Electric Power Steering)
Fuel Pump Motor Repair procedures
Removal
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
Disconnect the fuel pump motor connector (A) and fuel sender connector
(B).
Lift the fixing hook (A) by using a common driver, and then remov
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
