KIA Niro: Child restraint system (CRS)
KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Safety features of your vehicle / Child restraint system (CRS)
- Our recommendation: Children always in the rear
- Selecting a Child Restraint System (CRS)
- Installing a Child Restraint System (CRS)
READ NEXT:
Our recommendation: Children always in the rear
Infants and younger children must be
restrained in an appropriate rearwardfacing
or forward-facing CRS that has
first been properly secured to the seat of
the vehicle. Read and comply with the
instructions for installation and use provided
by t
Selecting a Child Restraint System (CRS)
Operation
Select a Child Restraint System based
on your child's height and weight. The
required label or the instructions for
used typically provide this information.
Select a Child Restraint System that
fits the vehicle seati
Installing a Child Restraint System (CRS)
Operation
Properly secure the Child Restraint
System to the vehicle.
Make sure the Child Restraint System
is firmly secured.
Secure the child in the Child Restraint
System.
WARNING
Before installing your Child Restrai
SEE MORE:
Start/Stop Button | ESCL (Electronic Steering Column Lock)
Start/Stop Button Repair procedures
Removal
Disconnect the negative (-) battery terminal.
Remove the crash pad garnish assembly (RH). (Refer to Body - "Crash Pad Garnish (RH)")
Remove the start/stop button.
(1) Push
Duct Sensor Repair procedures
Inspection
Check that the voltage between No. 1 and 2 duct sensors change.
Sensor (+ 5V)
Sensor ground
Specification
Replacement
Duct sensor - Floor
Disconnect the negative (-) battery terminal.
Remove the crash pad low
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
