KIA Niro: Engine coolant (Kia NIRO Hybrid)

KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Maintenance / Engine coolant (Kia NIRO Hybrid)

Checking coolant level

Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between MAX and MIN (F and L) marks on the side of the coolant reservoir when

Checking the inverter coolant level (HEV)

If frequent additions are required, we recommend that the system be inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner. The inverter coolant level should be in between MAX and MIN when the

Checking the inverter coolant level (PHEV)

SEE MORE:

System Operation Specification

Initial mode System initializing time PDW-F : 500ms after IGN1+ initial D Gear + below 10 Km/h PDW-R : 500ms after IGN1+ initial R Gear PDW recognizes LID and sets the sensor ID up during initialization. PDW activates each sensor

The Power Relay Assembly

Description The Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor. It is located inside the battery pack assembly and controls the high voltage power c