KIA Niro: Parking Collision-Avoidance Assist settings

Reverse Parking Collision-Avoidance Assist can warn the driver or assist with braking to help reduce the possibility of collision with a pedestrian or an object while driving at low speed.

Detecting sensor

Rear view camera
Rear view camera

Rear ultrasonic sensors
Rear ultrasonic sensors

Parking Collision-Avoidance Assist settings

Parking Safety

With the vehicle on, touch Settings ? Vehicle ? Driver Assistance ? Parking Safety on the infotainment system.

  • Rear safety: Reverse Parking Collision- Avoidance Assist will warn the driver and assist with braking when a collision with a pedestrian or an object is imminent.

NOTICE

Rear safety will be selected and Parking Collision-Avoidance Assist settings will be retained whenever the vehicle is restarted.

Turning Parking Collision Avoidance Assist On/Off

Turning Parking Collision Avoidance Assist On/Off

Press and hold the Parking Safety ( ) button more than 2 seconds, 'Rear Active Assist' or to turn the Parking Collision- Avoidance Assist on or off.

Rear Safety settings- (Kia Niro Hybrid only)

Rear Safety settings

A: Driver Assistance

  1. Parking Safety
  2. Rear Safety

With the vehicle on, touch Settings ? Vehicle ? Driver Assistance ? Parking Safety ? Rear Safety on the infotainment system to set the Rear Safety.

CAUTION

When the trailer is connected, Reverse Parking Collision-Avoidance Assist automatically turns off (if equipped). In this case, you cannot get help from Reverse Parking Collision-Avoidance Assist.

Always drive with care.

NOTICE

  • If the vehicle is restarted, Warning volume will maintain the last setting.
  • If Off is selected, the Warning volume of Reverse Parking Collision-Avoidance Assist will not turn off, but the volume will sound as Low.
  • If Off is selected, steering wheel vibration (if equipped) will not turn off.
  • If you change the Warning volume, the Warning volume of other Driver Assistance systems may change.

Warning volume (Kia Niro EV / Hybrid)

Warning volume

A: Driver Assistance

  1. Warning Volume
  2. High
  3. Medium
  4. Low
  5. Off (If steering wheel vibration function is equipped)

With the vehicle on, touch Settings ? Vehicle ? Driver Assistance ? Warning Volume on the infotainment system to change the Warning volume to adjust the Warning volume levels; High, Medium, Low or Off.

CAUTION- (Kia Niro EV only)

When the trailer is connected, Reverse Parking Collision-Avoidance Assist automatically turns off (if equipped). In this case, you cannot get help from Reverse Parking Collision-Avoidance Assist.

Always drive with care.

NOTICE

  • If the vehicle is restarted, Warning volume will maintain the last setting.
  • If Off is selected, the Warning volume of Reverse Parking Collision-Avoidance Assist will not turn off, but the volume will sound as Low.
  • If Off is selected, steering wheel vibration will not turn off.
  • If you change the Warning volume, the Warning volume of other Driver Assistance systems may change.

    READ NEXT:

     Parking Collision-Avoidance Assist operation

    Operating conditions Select 'Rear Safety' from the 'Parking Safety' menu of the infotainment system. Parking Collision-Avoidance Assist is enabled when the following conditions are satisfied: The tailgate and door are close

     Parking Collision-Avoidance Assist malfunction

    When Parking Collision-Avoidance Assist or other related functions are not working properly, the warning message will appear on the cluster, and Parking Collision- Avoidance Assist will turn off automatically. Kia recommends visiting an a

     Limitations of Parking Collision- Avoidance Assist

    Parking Collision-Avoidance Assist may not assist braking or warn the driver even if there are pedestrians or objects under the following circumstances: There is a problem with the vehicle Any non-factory equipment or accessory is installe

    SEE MORE:

     Suitability of each seating position for belted & ISOFIX Child Restraint Systems according to UN regulations for Latin America (Information for use by vehicle users and CRS manufacturers)

    Yes: Suitable for fitment of the designated category of CRS No: Not suitable for fitment of the designated category of CRS "-": Not applicable The table is based on LHD vehicle. Except for the front passenger seat, the table is

     Hood

    Hood / Repair Procedures Adjustment After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. Adjust the hood height by turning the hood overslam bumpers (C). After loosening the hood l

    Categories