KIA Niro: Towing
READ NEXT:
Towing service
Wheel dolly
Proper lifting and towing procedures
are necessary to prevent damage to
the vehicle. The use of wheel dolly (1)
or flatbed is recommended.
On 2WD vehicles, it is acceptable to
tow the vehicle with the rear wheels
Emergency towing
Front
Rear
Operation
Remove the hole cover by pressing
the lower part of the cover on the
bumper.
Install the towing hook by screwing it
clockwise into the hole until it is fully
secured.
After use, remove the towing hook
and
Emergency commodity
Fire extinguisher
If there is small fire and you know how to
use the fire extinguisher, follow these
steps carefully.
Pull out the safety pin at the top of the
extinguisher that keeps the handle
from being accidentally pressed.
Aim
SEE MORE:
Rear Bumper beam Assembly
Rear bumper beam assembly
Replacement
Warning
Put on gloves to protect your hands.
Warning
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
Be careful not to bend or scratch the trim a
Fuel Sender Repair procedures
Removal
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
Disconnect the fuel sender connector (A).
Lift the fixing hook (A) by using a common driver, and then remove the
fuel sender (B).
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us