KIA Niro: Driving electric vehicle
KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Electric vehicle guide (Kia Niro EV) / Driving electric vehicle
- Starting the vehicle/ Stopping the vehicle
- Distance to empty
- ECO driving
- Power/Charge gauge
- Warning and indicator lights (related to electric vehicle)
- LCD display messages
- Power limited
- Stop safely and check power supply
READ NEXT:
Starting the vehicle/ Stopping the vehicle
This section describes how to start and
stop the vehicle, what is displayed on the
various gauges and LCD displays, and so
on.
Starting the vehicle
Holding the smart key, sit in the
driver's seat.
Fasten the seat belt before sta
Distance to
empty
The distance to empty is displayed differently
according to the selected drive
mode in the Drive Mode Integrated Control
System.
For more information, refer to "Drive
mode integrated control system"
When destination is not set
ECO driving
A: Electric vehicle
Energy information
In order to check the ECO driving history,
select Menu → Energy information
on the screen.
Electric energy economy history
A: Energy information
Energy consumption history
It is possibl
SEE MORE:
Battery Tester- The Micro 570 Analyzer
The Micro 570 Analyzer
The Micro 570 Analyzer provides the ability to test the charging and starting
systems, including the battery, starter
and alternator.
Warning
Because of the possibility of personal injury, always use
extreme caution
Power Cable (HPCU-HSG, Electric /C Compressor). Main High Voltage Battery System, Sub High Voltage Battery System
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Shut off the high voltage.
(Refer to "High voltage Shut-off Procedures")
Disconnect the motor power cable connector (A) and HSG p
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
