KIA Niro: Hybrid system overview (Kia NIRO Hybrid)

KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Hybrid system overview (Kia NIRO Hybrid)

Driving the hybrid/plug-in hybrid vehicle

Components of the hybrid/plug-in hybrid vehicle

PHEV (Plug-in Hybrid Electric Vehicle) system / HEV (Hybrid Electric Vehicle) system

PHEV (Plug-in Hybrid Electric Vehicle) system The Kia Plug-in Hybrid Electric Vehicle (PHEV) shares the characteristics of both a conventional hybrid electric vehicle and an all-electric vehicle. When used as a conventional hybrid electric veh

Charging the plug-in hybrid vehicle

Charging information

AC Charger: The plug-in hybrid vehicle is charged by plugging into a AC charger installed in your home or a public charging station. (For further details, refer to "AC charger") Trickle Charger: The plug-in hybrid vehicle can

SEE MORE:

Hybrid Control System / Components And Components Location

HPCU (Hybrid Power Control Unit) On-Board Charger (OBC) Charge Port Power Cable (HPCU↔HSG,Electronic A/C Compressor) Power Cable (HPCU↔Main High Voltage Battery System) Power Cable (Main High Voltage Battery System ↔ Sub High

Fuel Pump Repair procedures

Fuel sender Turn the ignition switch OFF, and then remove battery (-) terminal. Remove the fuel pump assembly. Using an ohmmeter, measure the resistance between terminals 1 and 6 of sender connector (A) at each float level.